The Silkland DP80 DisplayPort Cable review is for gamers who need a short, high-bandwidth link between a DisplayPort-equipped computer and monitor.
Its 1.6-foot length and DP 2.1 UHBR20 support make it a focused choice for nearby components, provided both ends of the setup can use the features you want.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers matching DP 2.1 equipment and looking for a short connection between a PC and monitor.
- VESA-certified DisplayPort 2.1 cable with up to 80 Gbps data transfer and UHBR20 support.
- Supports uncompressed 4K at 240 Hz, 8K at 60 Hz, and 2K at 540 Hz; listed higher modes include up to 16K at 60 Hz, 8K at 240 Hz, and 4K at 540, 480, or 360 Hz with DSC enabled.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3; backward compatible with DP 2.0 and DP 1.4.
- Passes through uncompressed 7.1, 5.1, or 2.0 audio.
Pros
- High listed bandwidth and support for demanding resolution and refresh-rate combinations.
- Short length can reduce excess cable around closely placed computer and monitor ports.
Consider before buying
- The 1.6-foot length is restrictive if the computer and display are not positioned close together.
- The most demanding listed modes depend on the graphics card, monitor, settings, and DSC support.
Read the full review summary
This cable combines a VESA-certified DP 2.1 design with a listed bandwidth of 80 Gbps, male-to-male DisplayPort connectors, and support for high refresh rates and resolutions.
Its compact length can help keep a desk connection tidy, while the nylon exterior, triple shielding, and latch-free connectors are practical construction details for frequent setup adjustments.
It is best suited to a gaming PC positioned close to its monitor, especially when both devices support DisplayPort 2.1 UHBR20.
The cable is backward compatible with DP 2.0 and 1.4, but compatibility alone does not make every listed resolution or refresh rate available; check your graphics card and display specifications, including DSC support where relevant.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth potential
Its 80 Gbps DP 2.1 UHBR20 design is aimed at high-bandwidth monitor connections.
High-refresh gaming fit
The listed modes include uncompressed 4K at 240 Hz and 2K at 540 Hz, with additional higher modes when DSC is enabled.
Setup flexibility
At 1.6 feet, it suits close components but leaves little slack for wider desk layouts.
Connector convenience
The connectors have no latch, which can make plugging and unplugging simpler.
Build details
Tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior are practical construction features.
Device compatibility
It works with DisplayPort-equipped devices and supports backward compatibility, though top modes depend on both connected devices.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with up to 80 Gbps data transfer and UHBR20 support.
- Supports uncompressed 4K at 240 Hz, 8K at 60 Hz, and 2K at 540 Hz; listed higher modes include up to 16K at 60 Hz, 8K at 240 Hz, and 4K at 540, 480, or 360 Hz with DSC enabled.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3; backward compatible with DP 2.0 and DP 1.4.
- Passes through uncompressed 7.1, 5.1, or 2.0 audio.
- Male-to-male DisplayPort connectors have no latch; the cable uses 24K gold-plated connectors, 28 AWG tinned copper conductors, triple shielding, and a nylon exterior.
- Measures 1.6 feet and is intended for indoor use with DisplayPort-equipped computers, graphics cards, and monitors.
Pros and Cons of Silkland DP80 Cable
Pros
- High listed bandwidth and support for demanding resolution and refresh-rate combinations.
- Short length can reduce excess cable around closely placed computer and monitor ports.
- Backward compatibility gives it a path to work with DP 2.0 and DP 1.4 equipment.
- Latch-free connectors and a flexible nylon exterior suit setups that are adjusted or reconnected.
Consider before buying
- The 1.6-foot length is restrictive if the computer and display are not positioned close together.
- The most demanding listed modes depend on the graphics card, monitor, settings, and DSC support.
- A short cable may be inconvenient when ports are recessed or cable routing requires extra slack.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if your PC and monitor sit close together and both have DisplayPort ports.
Its 80 Gbps rating and support for UHBR20 target systems where high resolution and refresh rate matter, while backward compatibility can also make it relevant to older DisplayPort setups.
Before choosing it for a particular display mode, check the capabilities of both the graphics card and monitor.
The product information notes that both should ideally support DisplayPort 2.1 UHBR20; the higher modes also depend on DSC where specified. This cable supplies the connection, but it cannot add display capabilities that the devices do not support.
Its physical design is also worth considering if you often swap equipment or adjust a monitor: the connectors have no latch, and the exterior is nylon.
Measure the route between ports first, especially if your PC sits under a desk or the monitor connection is awkward to reach.
Who should skip it
Skip this length if you need to route the cable around a desk, through a cable tray, or from a computer placed far from the monitor. Measure the complete path and leave enough slack before buying.
Look for a different connection length or cable type if either device lacks a DisplayPort port.
For the highest listed refresh rates and resolutions, confirm the exact support and required settings for both connected devices before relying on a particular mode.
What the Silkland DP80 Cable means for a gaming setup
Bandwidth and display modes
The 80 Gbps rating and UHBR20 support place this cable in the high-bandwidth DP 2.1 category.
The listed uncompressed modes reach 4K at 240 Hz, 8K at 60 Hz, and 2K at 540 Hz; higher combinations are listed with DSC enabled.
Treat those figures as possible configurations rather than a guarantee for every setup, and confirm the graphics card and monitor support the same mode.
A short run needs careful measuring
A length of 1.6 feet is useful when a computer and display sit beside one another or when a compact connection is the goal.
That same length can limit routing options, particularly if ports face away from one another or the PC is mounted beneath the desk. Measure the route itself, not just the straight-line distance between devices.
Connection and compatibility
The cable connects DisplayPort ports and is described as backward compatible with DP 2.0 and 1.4. It also supports VRR, FEC, ALLM, MST, and DSC 1.2a, along with dynamic HDR10+ and HDCP 2.3.
The useful combination depends on what the source and display implement, so check their manuals for the functions and modes you intend to use.
Construction for repeated use
Gold-plated connectors, 28 AWG tinned copper conductors, triple shielding, and a nylon outer layer describe the cable’s construction.
The latch-free plug design may make removal easier when access is tight, though a secure connection still depends on seating the plugs fully.
These details may matter more in a frequently adjusted setup than in a cable that stays connected behind a desk.
Alternatives to Silkland DP80 Cable
One relevant option is included for buyers who need more reach; compare the length and display modes against your setup before choosing.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps 16K DisplayPort Cable, 10 ft
Choose the DP80 when the short reach fits and its higher listed bandwidth suits your display setup. The 10-foot alternative is a better fit when you need more routing distance and its listed modes meet your monitor’s requirements.
- This 10-foot Silkland cable lists 54 Gbps bandwidth, supports 4K at up to 240 Hz and 8K at 120 Hz, and includes a braided exterior and 24K gold-plated connectors.
- The DP80 cable is 1.6 feet long and lists up to 80 Gbps bandwidth, making it suited to a short connection and high-bandwidth setup.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a nearby PC-to-monitor connection where DP 2.1 bandwidth and high refresh rates are part of the plan.
Its 1.6-foot reach is the main buying constraint, and the display modes depend on support from both connected devices.
Measure your cable route and verify the graphics card and monitor support the resolution, refresh rate, and DSC requirements you intend to use.
If the short reach fits, the cable’s bandwidth, backward compatibility, and practical construction details make it a sensible candidate for a compact gaming setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact DisplayPort cable for gamers matching DP 2.1 equipment and looking for a short connection between a PC and monitor.
- VESA-certified DisplayPort 2.1 cable with up to 80 Gbps data transfer and UHBR20 support.
- Supports uncompressed 4K at 240 Hz, 8K at 60 Hz, and 2K at 540 Hz; listed higher modes include up to 16K at 60 Hz, 8K at 240 Hz, and 4K at 540, 480, or 360 Hz with DSC enabled.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3; backward compatible with DP 2.0 and DP 1.4.
- Passes through uncompressed 7.1, 5.1, or 2.0 audio.