The VIVO Quad Pneumatic Monitor Mount review is for anyone planning a four-screen desk setup and looking to raise the monitors off the work surface.
Its two pneumatic arms, two fixed center brackets, and clamp attachment make compatibility and layout important to check before buying.
VIVO Quad Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V400G Quad Pneumatic Monitor Mount
A four-screen desk mount for users with compatible 17- to 32-inch monitors who want adjustable side arms and a clamp-mounted setup.
- Holds four monitors from 17 to 32 inches, each weighing up to 17.6 pounds.
- Requires VESA mounting holes in either a 75x75mm or 100x100mm pattern.
- Uses two pneumatic side arms and two fixed center brackets.
- Provides +90° to -90° tilt, 180° swivel, and 360° rotation on the articulated arms.
Pros
- Brings four compatible screens onto one desk mount.
- Pneumatic side arms are designed for counterbalanced repositioning.
Consider before buying
- Only the two side positions use pneumatic arms; the two center brackets are fixed.
- The maximum supported weight is 17.6 pounds per monitor, so heavier displays fall outside the stated limit.
Read the full review summary
The STAND-V400G is designed around a specific workstation need: supporting four monitors from one desk mount. Each screen can weigh up to 17.6 pounds and measure from 17 to 32 inches, with VESA 75x75mm or 100x100mm mounting holes.
The side arms use pneumatic springs for counterbalanced movement, while two fixed center brackets provide mounting positions that do not share that arm adjustment.
This arrangement may suit a control room, trading desk, or productivity setup where four screens matter more than independent movement for every display.
The C-clamp supports desks up to 3.25 inches thick, and the arms provide tilt, swivel, and rotation adjustments.
Check each monitor's weight and VESA pattern, then map out where the fixed center screens will sit before committing to the layout.
The buying factors
VIVO Quad Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Four-screen capacity
Supports four monitors, with a stated maximum of 17.6 pounds per screen.
Monitor compatibility
Fits 17- to 32-inch screens with VESA 75x75mm or 100x100mm patterns; monitor weight also needs checking.
Position adjustment
Side arms tilt, swivel, and rotate; the center brackets are fixed.
Pneumatic movement
Two pneumatic springs counterbalance the monitors for smooth transitions, with tension adjustment for different weights.
Desk mounting
The heavy-duty C-clamp accommodates surfaces up to 3.25 inches thick, subject to desk fit.
Setup support
Step-by-step instructions and hardware are included, and the product carries a three-year warranty.
Key Features and Specifications of VIVO Quad Mount
- Holds four monitors from 17 to 32 inches, each weighing up to 17.6 pounds.
- Requires VESA mounting holes in either a 75x75mm or 100x100mm pattern.
- Uses two pneumatic side arms and two fixed center brackets.
- Provides +90° to -90° tilt, 180° swivel, and 360° rotation on the articulated arms.
- Pneumatic springs counterbalance the monitors, with adjustable tension for heavier or lighter screens.
- Attaches to a desk with a heavy-duty C-clamp for surfaces up to 3.25 inches thick.
- Constructed from steel and aluminum, with assembly hardware, instructions, and a three-year warranty included.
Pros and Cons of VIVO Quad Mount
Pros
- Brings four compatible screens onto one desk mount.
- Pneumatic side arms are designed for counterbalanced repositioning.
- Tension adjustment accommodates differences in monitor weight.
- C-clamp mounting avoids drilling into the desk surface.
- The stated compatibility covers a useful range of monitor sizes and common VESA patterns.
Consider before buying
- Only the two side positions use pneumatic arms; the two center brackets are fixed.
- The maximum supported weight is 17.6 pounds per monitor, so heavier displays fall outside the stated limit.
- The four-monitor arrangement and clamp require enough clear desk space and a compatible desk edge.
Who Should Buy VIVO Quad Mount?
Good fit
Consider the VIVO Quad Mount if four-screen capacity is the main requirement and all four monitors fit the stated size, weight, and VESA limits.
The two moving side arms allow adjustment of tilt, swivel, and rotation, while pneumatic counterbalance and tension tuning are intended to make repositioning more controlled.
Before ordering, check the mounting pattern and weight of every screen, including any accessories attached to them.
Measure the desk thickness where the clamp will sit and sketch the planned layout: the center displays attach to fixed brackets, so their placement will not have the same arm movement as the two side screens.
The supplied instructions and hardware support the assembly process, and the three-year warranty offers a defined coverage period.
For a workstation where displays stay in a planned arrangement, the mix of adjustable side positions and fixed center positions may be a practical way to consolidate four screens.
Who should skip it
Skip this mount if your screens exceed 32 inches or 17.6 pounds each, or if their mounting holes do not match either supported VESA pattern.
Also consider another layout if each of four monitors needs its own adjustable arm; this mount has only two pneumatic arms.
If your desk is thicker than 3.25 inches at the clamp location, measure another suitable mounting point before choosing it. The clamp's stated limit is a key fit condition.
How the VIVO Quad Mount Fits a Four-Screen Desk
Screen fit and load limits
Compatibility is determined monitor by monitor. A screen must fall within the 17- to 32-inch range, stay at or below 17.6 pounds, and have a 75x75mm or 100x100mm VESA pattern.
A setup with mixed displays should be checked against all three conditions for each screen rather than judged by the largest or heaviest monitor alone.
Two moving arms and two fixed positions
The mount divides its four positions into adjustable sides and a fixed center. The pneumatic side arms offer tilt from +90° to -90°, 180° swivel, and 360° rotation, with springs designed to counterbalance the screens.
The center brackets provide two additional mounting points, but buyers should plan their viewing angles around their fixed placement.
Desk attachment and workspace planning
The heavy-duty C-clamp attaches to a surface up to 3.25 inches thick, giving a drill-free mounting option for desks that meet that limit.
Check the clamp location for adequate access and plan how four displays will fit the available workspace before assembly.
The product data does not specify the footprint or exact reach of the assembled mount, so a layout check is useful where desk space is tight.
Tension adjustment and setup
The side-arm tension can be increased for heavier monitors or decreased for lighter ones, giving the user a way to tune the counterbalance to the displays within the stated limits.
Hardware and step-by-step instructions are included, and the three-year warranty provides a defined term of coverage. These details make setup more approachable, though four monitors still call for careful placement and compatibility checks.
Alternatives to VIVO Quad Mount
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V004F Quad Monitor Desk Stand
Choose the STAND-V400G when the 17- to 32-inch range, clamp mounting, and pneumatic side arms match your desk and monitors.
The STAND-V004F is a relevant option if a freestanding base is preferable or you need support for screens smaller than 17 inches; account for its base dimensions of 15.25 by 11 inches.
- The STAND-V004F also supports four monitors up to 17.6 pounds each, but its stated screen range is 13 to 30 inches and it uses a freestanding base.
- Its arms provide tilt, swivel, rotation, and height adjustment along the center pole.
- The VIVO Quad Mount supports four 17- to 32-inch screens up to 17.6 pounds each, using two pneumatic arms and two fixed center brackets.
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO AeroPoise Dual Monitor Stand
Choose the Quad Mount if four screens are essential and the fixed center positions suit your layout.
The AeroPoise is a closer fit for a two-monitor desk that benefits from adjustable arms on both displays and a higher stated per-screen weight range.
- The AeroPoise is a two-monitor mount for 17- to 32-inch screens weighing from 4.4 to 19.8 pounds each.
- It uses mechanical spring arms, supports tilt, swivel, and rotation, and attaches by C-clamp or optional bolt-through grommet mount.
- The VIVO Quad Mount is built for four displays, with two adjustable pneumatic side arms and two fixed center brackets.
Is VIVO Quad Mount Worth It?
The VIVO STAND-V400G is worth considering when a desk needs to support four compatible monitors and the mix of two pneumatic side arms with two fixed center brackets fits the intended arrangement.
Its wide movement range on the side arms, adjustable tension, and clamp attachment address useful parts of a multi-screen setup.
Confirm every screen's size, weight, and VESA pattern, along with the desk's clamp fit, before buying.
If all four displays need independent arm movement, or any screen exceeds the stated limits, this particular layout is unlikely to match the need.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V400G Quad Pneumatic Monitor Mount
A four-screen desk mount for users with compatible 17- to 32-inch monitors who want adjustable side arms and a clamp-mounted setup.
- Holds four monitors from 17 to 32 inches, each weighing up to 17.6 pounds.
- Requires VESA mounting holes in either a 75x75mm or 100x100mm pattern.
- Uses two pneumatic side arms and two fixed center brackets.
- Provides +90° to -90° tilt, 180° swivel, and 360° rotation on the articulated arms.